February 19, 2019February 19, 2019 by Monkey

Immobilizing Gag Tie

I learned this tie from a friend several years ago. It has the wonderful properties of being hard to escape and being a large generator of drool. Model: CherriesJubalie

Standard Safety disclaimer: Bondage is fun but it can also be dangerous. Ropes that are too tight or in the wrong place can cut off blood flow or cause nerve damage. It is your responsibility to ensure that you play safely. Whatever you do, have fun doing it!

Step 1 - Make a lark's head and place it around the wrists. — Step 1 – Make a lark’s head and place it around the wrists.

Step 2- Wrap around the wrists several times as with a standard two column tie.

Step 3 - Feed the tails through the bight in preparation for the cinching wraps. — Step 3 – Feed the tails through the bight in preparation for the cinching wraps.

Step 4 - Wrap the first of two cinching wraps by pulling the tails between the wrists and back underneath. — Step 4 – Wrap the first of two cinching wraps by pulling the tails between the wrists and back underneath.

Step 5 - Pass the cinching rope around a second time and pull snug. — Step 5 – Pass the cinching rope around a second time and pull snug.

Step 6 - Push a bight up in between the wrists in preparation for making a half hitch. — Step 6 – Push a bight up in between the wrists in preparation for making a half hitch.

Step 7 - Pass the tails through the loop of the bight to create the half hitch. — Step 7 – Pass the tails through the loop of the bight to create the half hitch.

Step 8 - Snug up the cinch ropes and pull the half hitch tight. — Step 8 – Snug up the cinch ropes and pull the half hitch tight.

Step 9 - Pull the wrists behind the head and start wrapping the ropes around the arms. — Step 9 – Pull the wrists behind the head and start wrapping the ropes around the arms.

Step 10 - Wrap the rope around the arm and through the mouth. — Step 10 – Wrap the rope around the arm and through the mouth.

Step 11 - Feed the tails through the "bight" between the wrists and the working tails. This allows us to change directions and go back the other way. Doing so allows us to better control the tension on the rope as we go. — Step 11 – Feed the tails through the “bight” between the wrists and the working tails. This allows us to change directions and go back the other way. Doing so allows us to better control the tension on the rope as we go.

Step 12 – Pull the ropes through the mouth tight and start wrapping the working end around the arm in the other direction.

Step 13 – Wrap the ropes through the mouth and bring the working end back to the wrists in back.

Step 14 - Feed the tails through the bight created when you wrapped back around the arms a second time and pull everything tight. — Step 14 – Feed the tails through the bight created when you wrapped back around the arms a second time and pull everything tight.

Step 15 - Feed a bight between the arm and head, keeping the rope from step 14 snug. — Step 15 – Feed a bight between the arm and head, keeping the rope from step 14 snug.

Step 16 - Pull the bight back under the wraps by the wrist. This will allow us to feed the working end through the loop and tighten the cinch. — Step 16 – Pull the bight back under the wraps by the wrist. This will allow us to feed the working end through the loop and tighten the cinch.

Step 17 - Feed the tails through the bight you just wrapped around the wraps. — Step 17 – Feed the tails through the bight you just wrapped around the wraps.

Step 18 - Work the ropes to pull the cinch snug. A snug cinch on each side is important to the integrity of this bondage. — Step 18 – Work the ropes to pull the cinch snug. A snug cinch on each side is important to the integrity of this bondage.

Step 19 - Begin creation of a half hitch by pulling a bight up while keeping the cinch snug. — Step 19 – Begin creation of a half hitch by pulling a bight up while keeping the cinch snug.

Step 20 - Finish off the half hitch by feeding the tails through the loop, pull snug and pull the ropes under the wrists to the other side. — Step 20 – Finish off the half hitch by feeding the tails through the loop, pull snug and pull the ropes under the wrists to the other side.

Step 21 - Create another, identical, cinch on this side. Make sure the cinch is pulled snug. — Step 21 – Create another, identical, cinch on this side. Make sure the cinch is pulled snug.

Step 22 - Tie off the ropes in a way that keeps the cinch from loosening. Once again, I used a square knot here. — Step 22 – Tie off the ropes in a way that keeps the cinch from loosening. Once again, I used a square knot here.

Step 23 - Enjoy! — Step 23 – Enjoy!

Leave a Reply Cancel reply